Doktor A. News

The Emporium
A group show around the theme of a good old fashioned carnivale.
With Seymour and Skeleton Heart.
Opening June 8th.
Strychnin Gallery
Boxhagenerstrasse 36
Berlin, Germany

Resplendent in royal purple and shining silver ( well a bit tarnished really but who is going to tell him ) this colourway of the latest Mechtorian figure from Kuso Vinyl is EXCLISIVE to Doktor A and only available from his online Spookypopshop.

The “Stout” ( A.K.A Mourning ) edition of this 6″ tall vinyl figure comes in a splendid flock lined presentation box and is limited to only 120 pieces..
Available to purchase from Sunday the 13th May (UK time). £45 each.

Arts Unknown and myself have become convinced of the existence of the “Curse of Bella”.
Some toy projects run as smooth as clockwork. Some do not. This one is one of the latter..
Bella has resisted creation every step of the way. But after several abandoned digital sculpting attempts and two physical sculpting attempts we finally have a locked down final prototype which is capable of being manufactured..

I am sorry so many of you have had to wait so long to meet her, but she is moving forward now at speed.
Along the way everything that could go wrong, has gone wrong.. The highlight (or lowlight of which) was the flooding of one of the sculptor’s studios, Bella wanting to escape to the sea no doubt..
It’s been a baptism of fire for Arts Unknown as this was one of their first projects. But they stuck by it and like myself decided to do it right or not do it at all.
And now she is looking better than ever. With improved, re-tooled weapons and a secret tucked away somewhere.
She is, quite literally, a killer…

On Saturday the 5th of May the final Bella Enamelled badge goes on sale from my online store.
This time it is the much collected “Mourning” edition. Polished silver, Purple and Black.

Each 1″ metal and enamel filled badge is engraved on the rear with its edition number out of a total of 100 pieces. They come carded and bagged.

It looks like an art book I was asked to be a part of has been published.
“Steampunk: The Art of Victorian Futurism” curated by Jay Strongman and published by Korero books.
It’s a splendid hardbacked tome of loosely categorised steampunk style artist’s works. Lots of lovely photos and some mini biographies as well as a short round up of what Steampunk is all about..

It’s more of an artbook than anything else, there is no cosplay type prop works included here other than the splendid works of Mr. Tom Banwell. Even Mr. Brian Despain gets a few pages which gives you an idea how loose the Steampunk label is.
I have been invited to be part of four or five books like this, but this is the only one to make it to print thus far. And I am jolly pleased to be included in this handsome edition.
ISBN : 978-1-907621031

It can be purchased on Amazon HERE.

Organic Chemist by trade Archibald Schpoon enjoyed cookery as a hobby.
Upon a chance meeting with Joshua Hipplethwaite he began experimenting with confectionary and soon it became a driving passion.
He delved into the conundrum of complex and unusual ingredient combinations and the unexpected effects that they could have on some types of Mechtorians.
Ever pushing and blurring the boundaries of what was possible within the fields of exquisite delicacies and recreational pharmaceuticals.

Vinyl, Acrylic, Epoxy Resin. Polymer Clay, Lead, Rubber, Found Objects.

For Monsters & Misfits II.
Opening 13th April at Kusakabe Folk Museum, Takayama, Japan.

Click on the images to enlargenize!

Joshua Hipplethwaite
Confectioner and innovator, Joshua is the creator of the renown Ee-by-Gum, chewing candy.
This popular delicacy has an odd intoxicating effect on steam driven Mechtorians, but is repugnant to those who are spring wound.
One of the fastest selling sweets in history, it’s long term effects are unknown and its prohibition has been called for in some quarters.
Though he does not partake himself Joshua wised to dispense his product as far as possible.
To this end he rebuilt his own body so he could crank out the candy wherever he travelled.
First one is free! And they always come back for more.

Styrene, Vinyl, Epoxy Resin, Polymer Clay, Lead, ABS, Glass, Silicone Rubber, Copper, Aluminium, Found Objects.

For Monsters & Misfits II.
Opening 13th April at Kusakabe Folk Museum, Takayama, Japan.

Click on the images to enlargenize!

The 7th Mechtorian metal enamelled badge is available from my online store NOW!

I decided to start a series of blogs peeking into my personal collection of art and geekery. Just for my own fun to give me a little downtime (hah!) project and to share some of the stuff I have weasled away.

Today it’s my Bladerunner gun.
(Click on the pics to enbiggen!)

Well it’s actually called the TOME-BLA. Due to copyright reasons. And believe me the makers did try and get it officially licensed, but to no avail.

This is one of the prized pieces of my sci-fi collection. It is a perfect replica of the screen prop used by Harrison Ford in the movie. It is mostly cast metals with some plastic parts and weighs pretty much the same as a Magnum handgun, which is a lot.. It’s a chunky, solid piece which really does look and feel like a real gun.

Manufactured by Tomenosuke in Japan it was a passion project for the owner, Mr. Shinji Nakako who was a top movie journalist in the USA in the 1980′s and is reputedly the fellow who coined the term SFX.. He is also the author of the splendid Sci-Fi film encyclopedia ” A Pictorial History of SF Films”.

The Blaster comes in a stunning foil stamped box featuring nice 1980′s style graphics recalling scenes from Mr. Scott’s splendid film.

Inside it nestles in custom cut foam with the amunition lined up below it.

Included in the box are a schematic posted of the blaster showing the breakdown of the piece with an exploded view on the rear. This really shows the amount of work that went into the production of this piece. It is about as far from a resin block prop as you can get. Also included is a cracking booklet with lots of full page photos of the actual movie prop which was scutinised and measured  to get this repro as accurate as possible. It’s nice to see how beaten up the prop was and makes it tempting to “age” the Blaster from it’s factory fresh appearance to a more used look… Maybe one day, but for now it is too pretty..

There is a really nice touch in that the little lights under the barrels work. And they slowly warm up when you turn them on rather than simply click on and off.

The rear trigger operates the hammer action and revolves the barrel as you would expect. The forward trigger has no function on this prop and indeed it is unclear how it was supposed to work on the film gun had it been real. Maybe discharged a heavier round from the top barrel, though this is blocked. I recall Ridly Scott taking about how the gun was proposed to fire mini black holes which would fold the target in on itself to destroy them, but this was never made clear in the film..

I love the transparent amber resin handle. It lends a real lightness and elegance to the weapon.

Though the safety catch is locked in place, the lever action works and opens the breach as to eject some empty cartridge. This is not a common feature for handguns, usually only found on rifles. It is a lovely detail for them to have engineered into the prop.

The chamber can also be unlocked and be hinged out. It revolves and the Brass cased, Steel tipped shells can be loaded into place.

I decided I really needed a decent wall mount to properly show the Blaster off and to display is safely. So I knocked up this from some MDF, Foam-core and mounting board with steel supports. It is modelled on the wall tiles in Deckard’s apartment, which in turn are inspired by the work of architect Frank Lloyd Wright.

So now I bet you want to know where you can get your hands on one of these beauties for yourself?

Well there were two versions made of the Tomenosuke-Blaster, one is the “Hero Model”, which is this one, and another one is the “Police Model”.

Shinji wrote on his blog :
“The Police Model of Tomenosuke Blaster is the perfect reproduction of the futuristic gun that made an appearance in the sci-fi cult movie in 1982. After spending more than four years of development, the Hero Model, used by the protagonist of the same movie, was released last December to be welcomed by the fans. This time, the gun used in the movie by the police force will be released with the limited production of 300.”

The Police model is the same but has a solid black handle instead of the clear amber version.
This is the URL for the Tomenosuke-Blaster on the Japanese store site. (In Japanese.) :
http://www.tomenosuke.com/blaster/

And Shinji’s blog about the Blaster (In Japanese.) :
http://tenshu53.exblog.jp/i17/

You can also purchase them from the movie toy store “Hollywood Collectors Gallery”.  They also hold stock in LA.
The Hero Model. ( Info in English at the bottom of the page..)
http://www.hollywood-japan.jp/html/newpage.html?code=11
The Police Model. ( Info in English at the bottom of the page..)
http://www.hollywood-japan.jp/html/newpage.html?code=16

I don’t think this Blaster could have been made any better than it has been. Truely a remarkable piece.
To the modelmaker who built it and to Shinji and his team who putthe project together I have to say ; “You’ve done a man’s job sir!”

I have a new print available over at Circus Posterus.

http://circusposterus.com/sale/2012-monsters-misfits-ii-fundraiser

Its available as part of a stunning 5 piece set or on its own.
Each print is a hand pulled silk-screen print created by tiny Bird studio and signd and numbered by me.
Edition of 125.